One of the most common questions we get: "Will this top work with my post?" The short answer: threadless pins use a universal insertion size, but the fit still comes down to your post's gauge, its depth, and whether your base is truly threadless. Here's everything you need to know before you buy.
Threadless vs. Internally Threaded: What's the Difference?
| Feature |
Threadless (Press-Fit) |
Internally Threaded |
| How it connects |
Pin bends slightly; friction holds it in the post's opening |
Pin screws into a threaded post |
| Cross-brand compatible? |
Generally yes for the pin, since threadless pins are a standard ~25G insertion size across brands — but always confirm post depth and quality |
Rarely — thread pitch varies by brand |
| Common styles |
Flat-back labrets, nostril studs, cartilage |
Barbells, some labrets |
| Key tip |
A bent pin that's too stiff or too loose won't hold securely |
Never force-thread — you'll strip the post |
Important: Threadless tops are not compatible with internally threaded posts, and vice versa. Always confirm your base type before purchasing a top separately.
Gauge & Pin-Fit Compatibility Table
This is the core reference table. On a threadless system, the pin end is a standardized ~25G shaft regardless of the post it's paired with — that's what lets one top seat into posts of very different gauges. What determines your fit is the post's gauge, since that's what sits in your piercing.
| Post Gauge |
Diameter (mm) |
Common Placements |
Typical Post Length Range |
Pin Insertion Size |
Notes |
| 18G |
1.0 mm |
Nostril, helix, tragus, flat |
6 mm – 10 mm |
~25G (universal) |
Our smallest stocked gauge; smaller sizes (20G and below) are typically for older/vintage jewelry styles |
| 16G |
1.2 mm |
Cartilage, flat, tragus, daith |
6 mm – 12 mm |
~25G (universal) |
Standard cartilage gauge |
| 14G |
1.6 mm |
Navel, nipple, septum, eyebrow |
8 mm – 14 mm |
~25G (universal) |
Thicker post; verify threadless vs. threaded |
The post's gauge is what matters for your piercing — it must match the gauge you're currently wearing. The pin itself is built to a standard insertion size across gauges and, generally, across brands, which is what makes threadless tops swappable onto posts of different sizes. We carry 18G and up; 20G and smaller are older/vintage piercing styles.
How to Dial In the Right Pin Tension
Threadless pins are designed with a slight bend that creates tension inside the post's opening, holding the top securely in place. Pin length itself isn't something you adjust — fit is controlled by the bend, and by choosing the correct post length for your piercing up front. Here's how to get the tension right:
-
Too loose? Gently increase the bend angle of the pin (toward a slight "J" shape). More bend = more tension.
-
Too tight / hard to insert? Reduce the bend angle slightly — a near-straight pin is easier to seat but may come loose over time.
-
Still not holding? Double check the pin and post are fully seated together; a shallow seat will feel loose no matter how the pin is bent.
Choosing the Right Post Length
Since pin length isn't adjustable, picking the correct post length for your piercing depth matters more than anything else. Use this as a starting guide, and size up for fresh or swollen piercings:
| Post Length |
Best For |
| 6 mm |
Healed piercings, thin tissue |
| 8 mm |
Standard healed placement |
| 10 mm |
Thicker tissue, fresh piercings |
| 12 mm+ |
Swollen/fresh piercings or navel |
A Note on Brand Tolerances
Threadless pins are built to a standard insertion size, but manufacturing tolerances still vary between brands. A pin from Brand A may fit slightly tighter or looser in a post from Brand B. This is normal — it doesn't mean the jewelry is defective.
- Higher-quality implant-grade brands (ASTM F136 titanium, 316L steel, solid 14k gold) tend to have tighter, more consistent tolerances.
- We can't guarantee a perfect fit for every cross-brand combination — when in doubt, purchase the top and base as a matched set, or check with us first.
- If you're mixing tops and bases from different brands, adjust the pin bend as needed to dial in tension.
When to Confirm with Your Piercer
Always consult a professional piercer if:
- Your piercing is fresh or still healing — swelling affects what post length you need
- You're downsizing after initial healing — your piercer should measure the exact post length
- You experience pain, pressure, or embedding — jewelry may be the wrong length or gauge
- You're unsure of your gauge — piercers can measure with a taper or gauge wheel
- You want to mix tops and bases across brands — a piercer can test fit before you commit
Shop Threadless Jewelry at Three Moons
Browse our curated threadless collection — all pieces are labeled by gauge and post length to make pairing simple.
Shop Threadless Ends →
Have a compatibility question? Contact us and we'll help you find the right match.